Ariens 00008500 - Orange Spray Paint
|
 |
Ariens Orange Spray Paint
Rust Proofing
• Perfect for protecting scratches from rusting
Ariens Orange
• The perfect match for your Ariens snow thrower
Aerosol Spray
• Simply spray the paint onto your snow blower
|
| Model |
| |
Model Number: | 00008500 |
 | | | Manufacturer: | Ariens |
| Overview |
| | | Weight: | 1 Lbs. (0.45 kilograms) | | | | Consumer Warranty: | Not Available | | | | Commercial Warranty: | Not Available |
|
Average Rating: 5.0 of 5.0
|
|
|
 |
Written April 27, 2010 |
| Old snow blower |
| By Bill (Braintree, MA) |
I bought my ST824 back in 1986. It has been a great machine but was showing signs of age.
I had to replace the auger shaft bearing so while it was all apart I took off all the peeling paint and rust and I brought it back to life. I also rebuilt the carb. and used the Ariens brand orange paint to make it look and run like new.
It is good for another twenty years. |
 | |
Written August 15, 2008 |
| How to Maintain a Two-Stage Snow Blower |
| By Jon Hoch, Founder (Bolingbrook, IL) |
There’s a reason why people have garages. Nobody likes cranking wrenches in freezing weather.
We recommend servicing your two-stage snow blower every fall before the cold weather numbs your knuckles.
Step 1: Change the Oil
You should empty the gas tank every spring. But, wait until autumn to change the oil, so it’s as fresh as possible.
Always follow the manufacturer’s recommendations on the type and amount of oil to be used. Typically, you use 4-cycle oil for your two-stage snow blower.
Don’t use 2-cycle or any oil that mixes with gasoline. It’s for single-stage snow blowers instead.
Step 2: Change the Spark Plug
If you used your snow blower a lot last season, replace the spark plug too.
We offer maintenance kits that provide the compatible oil and sparkplugs. The kits vary depending on your engine type.
If you have an OHV engine, get an OHV kit. If you have an L-Head engine, get an L-Head kit.
Step 2: Rust Prevention
You want your snow blower to last for a long time. Melting snow is notorious for rusting scratched steel.
Use a wire brush or sand paper to remove as much rust as possible, so the paint will stick. Apply a thin coat and let dry. Repeat a few more times, and your rust problem is solved.
We currently sell Ariens orange spray paint. If your machine isn’t orange, any rust-proof or rust preventing paint will work.
By following these two steps, you snow blower will be ready for whatever winter throws at you. |
|
|
|
|
|
You may also like...
|
|
|
|
|
We Ship To: 
Discount:
Learn More
